Starts talking about his own custom 1911
“First of all, the feeding ramp is polished to a mirror sheen. It’s not going to have any feeding problems. The slide’s been replaced with a reinforced version, and it meshes perfectly with the frame. The frame itself has been iron-welded and scraped down multiple times for maximum precision. The front strap part of the frame has been checkered to make it dig into the hand. That prevents any slipping. The sight system’s original too. It’s a 3-dot type. It’s got an enlarged front sight, giving it superior target sighting capability. The regular hammer’s been replaced with a ring hammer. That enhances the cocking control and increases the hammer-down speed. They also reworked the grip safety to accommodate the ring hammer. It looks like they eliminated it altogether. This is a tool for pros. The thumb safety and slide stop are extended for precise handling. The base of the trigger guard is whittled down so you can use a high grip, and the trigger itself is a long type for easy finger access. The trigger pull is about 3.5 pounds. that’s about a pound and a half lighter than normal. The magazine well has been widened to make it easier to put in a new magazine. The magazine catch button has been filed down low to make it harder to hit it by mistake. The mainspring housing has been changed to a flat type to increase grip, and it’s even been fitted with stepping so that it won’t slip from the recoil when firing. On top of that, they added cocking serrations to the top part of the slide. That lets you load and eject cartridges faster in an emergency. Whoever did this is a professional, no question. This thing could shoot a one-hole at 25 yards in a machine rest.”
Just take the safety off. It’s a mechanical device that can and will fail when you need it most. The best safety you have is yourself and rigidly held gun handling rules.
I am generally against safeties on pistols because they should stay holstered if you’re carrying them, and the holster acts as the safety by blocking access to the trigger. If you’re in the act of shooting the gun, the saftey routinely gets in the way and requires training in an extra step before firing, something that could be a problem in an emergency. A common way to lose a violent encounter while carrying a gun is to fail to actually shoot your gun.
A rifle needs a safety because there’s no good way to block accidental trigger pulls like that, since you have to open carry to have any reasonable amount of access.
Anyone carrying a gun in a holster should be required have sufficient training to use the safety properly.
It gives you more time to think before killing something and also protects you from someone grabbing the gun or someone else mishandling your gun if it leaves your possession.
Just take the safety off. It’s a mechanical device that can and will fail when you need it most. The best safety you have is yourself and rigidly held gun handling rules.
Is this a genuine opinion you hold?
I am generally against safeties on pistols because they should stay holstered if you’re carrying them, and the holster acts as the safety by blocking access to the trigger. If you’re in the act of shooting the gun, the saftey routinely gets in the way and requires training in an extra step before firing, something that could be a problem in an emergency. A common way to lose a violent encounter while carrying a gun is to fail to actually shoot your gun.
A rifle needs a safety because there’s no good way to block accidental trigger pulls like that, since you have to open carry to have any reasonable amount of access.
Anyone carrying a gun in a holster should be required have sufficient training to use the safety properly.
It gives you more time to think before killing something and also protects you from someone grabbing the gun or someone else mishandling your gun if it leaves your possession.