Just bought my first ever acoustic guitar (a Taylor Big Baby) used on a local craiglist-equivalent for about 130$. It came in the original gigback which had only one back strap left. I decided to bike home and strap the guitar crosswise on my back… in hindsight I should have realised that the one strap could not be trusted. Anyway I biked for about 3m before the strao broke off completely and the guitar fell on the asphalt. Upon arriving home I found the damage you can see in the picture :( The tuning peg of the G string was very crooked, I pressed it back in shape and for the moment it seems relatively stable…

What do you think I should do? try to glue the piece together myself? get it done professionally? try to get a replacement headstock? thanks for any advice and condolences!

  • Nemo Wuming@lemmy.worldEnglish
    0·
    2 months ago

    Looks like an easy fix for a professional luthier. Depending on the price, you can choose if it is worth it, or if you can get another, better guitar instead.

    • neidu2@feddit.nlEnglish
      0·
      2 months ago

      Easy fix for anyone else too, if you’re not that worried about the way it looks. Personally I’m in this category, and this is what I’d do:

      1. Remove the strings so that there’s no tension at play.
      2. Remove the broken piece of wood, while making sure the metal stays in place.
      3. Wood glue the piece back, using clamps
      4. Just to be safe, wrap some metal wire around the head as reinforcement.
      5. Wait a day or two
      6. Restring, tune, and play.
      • foggy@lemmy.worldEnglish
        3·
        2 months ago

        Do not remove the broken piece of wood if it is not broken off already!

        This crack is plenty small enough to fill with wood glue and clamp overnight.

        Guitar repair is very Zen. You can’t ever really truly fuck up, because you’re starting place is fucked up. It’s just best to do what you can to not fuck up the fuck up Any more than it’s already fucked up. But if you do, that’s ok it was fucked up.

        • tyler@programming.devEnglish
          11·
          2 months ago

          It’s very hard to get wood glue into a small gap like that. You should remove the piece to apply glue to the entire surface if possible. I just repaired a tiller on a sailboat like this. Don’t try to just get the wood glue in the gap, especially if the gap is small.

          • foggy@lemmy.worldEnglish
            0·
            2 months ago

            I am certified in acoustic guitar repair under a Luthier.

            I would heavily advise against removing the wood.

            There is still structural integrity by the machine head at the A string. Removing that structural integrity and replacing it by gluing the whole two pieces back together could lead to difficulty keeping it’s tuning down the line.

            The only proof of my guitar-specific repair knowledge I can provide quickly is that I am aware of stewmac 😁 🎸

            • Illuminostro@lemmy.worldEnglish
              11·
              1 month ago

              This makes no sense. Removing the piece ensures that one can cover both surfaces of the pieces with wood glue before clamping it back together to cure. The joint between the glued pieces will be stronger than the original solid piece.

      • foggy@lemmy.worldEnglish
        0·
        2 months ago

        Homie that crack isn’t all the way through.

        This is a simple fix. You can DIY.

        Remove strings. Remove the hardware for your D string (assuming this isn’t a lefty model).

        Carefully pipe in some wood glue. Get it everywhere but not too much.

        Clamp it with whatever you got. Gotta be sturdy though. 100 rubber bands would work. So would wedging it in your damn toilet seat with enough weight on it.

        Clean off excess glue

        Let the glue set over night.

        Reattach that tuning hardware.

        Restring. You done. It fixed.

        That’ll be $200 for the glue and the rubber bands, plz

        Edit: added emphasis on wood glue. do t use Krazy Glue or any other Super glue. Super glue and wood glue are totally different products. This is an incredibly important distinction to make for a fix like this.

        Edit 2: please DO NOT USE TITEBOND as the person below suggests.

        You WILL fuck up your axe.

        • rugburn@lemmynsfw.comEnglish
          0·
          2 months ago

          This. But I’d use hide glue and then after filling the crack with the glue, use a suction cup to pull it through both sides

            • foggy@lemmy.worldEnglish
              0·
              2 months ago

              Absolutely not.

              Titebond expands. Hide glue/wood glue draws the wood fibers together…

              In this instance we want our adhesive to draw our wood fibers together.

              There is no more amateur mistake you could make than using krazy glue, tite bond, or any other polyurethane-based adhesive, in a situation such as this.

              This point will be drilled into your head should you ever study guitar repair under a Luthier. There are two kinds of glues, and two gluing situations.

              Edit: you can downvote if you want I’m literally making a repair like this ~10 times a year for a Luthier.

              You’re dead wrong. And you’ll fuck up a guitar.